Part Number: FEM-RBC-BL-2250-NE
The fire extinguisher mount can be purchased without a fire extinguisher, with a standard chemical fire extinguisher, or with a Halotron Gas fire extinguisher option.
Our Quick Release Fire Extinguisher Mount was designed specifically for the off-roader that was looking for a more refined trail rated fire extinguisher mount. When we looked at many of the fire extinguishers on the market we noticed a big gap in quality, price, and most importantly—durability. Many of the fabricated fire extinguisher mounts were rough, sticky to operate, and had sharp, dangerous edges on them. Then some of the other billet fire extinguisher mounts seemed quite fragile and appeared more for the hot rod market than the hard use 4×4 market. And let’s not forget the cheesy hose clamps that many of the other fire extinguisher mounts require. Rapto Worx has developed an affordable and very rugged version that will serve off-roaders well. Based on our Patent Pending Roll Bar Clamp System this fire extinguisher mount can mount to a plethora of roll cages from 1.500” to 2.25” tube diameters. We also have incorporated a rugged 3/8” steel T-Handle pull pins for the locking device, as well as stainless steel and zinc plated hardware.
Note: Jeep JK’s have a 2.25″ diameter roll bar in the rear. Note**: Currently the only roll bar clamps that we have available are for the following diameters: 1.75″, 2.00″, 2,25″. We are working on the rest of the diameters and will be available shortly.